From: Phillips, John (john.phillips@calanais.com)
Date: Fri Apr 26 2002 - 07:52:18 EDT
Dear all,
I have a Netra 105 which has previously been used as a firewall manager. I'm
trying unsuccessfully to connect a Wyse console to the server using the
serial port and a terminal server cable. I've got the settings correct as
far as the manual is concerned e.g. 9600 8-n-1 xon/xoff but I can't get it
to accept any keyboard input.
When I boot the server it comes up and gives all the normal solaris boot
info on the screen, but I can't break or login at the console. I've tried a
variety of cables, different consoles etc. Does anybody have any experience
of these servers - is there a special cable required?
Or is it possible that the keyboard has been disabled in some way, in that
case does anybody know how to reset the prom so that it goes back to the
default..
Thanks for any help..
Cheers
John
(John.Phillips@calanais.com) Unix Support, Calanais Ltd
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:15 EDT