From: Mike's List (mikelist@sky.net)
Date: Thu Apr 25 2002 - 16:54:22 EDT
Why do I keep getting the below errors? (after reboot) after I enable the
following command "eeprom ata-dma-enabled=1" on a Sun's HCL motherboard.
When I changed back to "eeprom ata-dma-enabled=0" everything is fine.
Motherboard is on the HCL, latest MB BIOS, Western Digital 30G HD.
All the hardware should be up-to-date and not out-dated where DMA
is not supported.
Thanks.
- Mike
Apr 25 15:38:55 news1 gda: [ID 107833 kern.warning] WARNING:
/pci@0,0/pci-ide@7,1/ide@1/cmdk@0,0 (Disk1):
Apr 25 15:38:55 news1 Error for command 'read sector' Error Level:
Retryable
Apr 25 15:38:55 news1 gda: [ID 107833 kern.notice] Requested Block 0,
Error Block: 0
Apr 25 15:38:55 news1 gda: [ID 107833 kern.notice] Sense Key: bad
block detected
Apr 25 15:38:55 news1 gda: [ID 107833 kern.notice] Vendor 'Gen-ATA '
error code: 0x8
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:15 EDT