From: zsterjos@csc.com.au
Date: Tue Apr 23 2002 - 01:38:56 EDT
Hi all,
We have a E10k with dual JNI FC64-1063 fibre cards with driver rev 2.2 at
the moment and I'm looking to upgrade it. I'm having problems upgrading to
2.5.18 (recommended by IBM) where I can no longer see my disks on
installation of the new driver level:- We are connecting to a IBM 2105 ESS
and a InRange FC/9000. I have also tried driver rev 2.5.9 without
success....Same problem, cannot see disks on reboot (boot -rs)
Has anyone had similar issues & how have you resolved them..I have thought
about upgrading the firmware to 13.3.7, we are currently at 13.3.5. Will
this help....Is there anything in the fcaw.conf or sd.conf that needs
changing for this new driver level.
Thanks in advance.
Regards,
Zoran Sterjoski
__________________________________________________
Email: zsterjos@csc.com.au
----------------------------------------------------------------------------------------
This email, including any attachments, is intended only for use by the
addressee(s) and may contain confidential and/or personal information and
may also be the subject of legal privilege. Any personal information
contained in this email is not to be used or disclosed for any purpose
other than the purpose for which you have received it. If you are not the
intended recipient, you must not disclose or use the information contained
in it. In this case, please let me know by return email, delete the message
permanently from your system and destroy any copies.
----------------------------------------------------------------------------------------
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:14 EDT