From: David Foster (foster@dim.ucsd.edu)
Date: Mon Apr 15 2002 - 20:44:23 EDT
How does one get the serial number for an A5100 disk array?
While I was working with Sun's technical support on another
matter, I was told that 'luxadm' will provide this, but I must
not know what to look for because from the man page and luxadm's
output I don't see it.
I need the serial number to give to tech support.
Here's the output I see:
$ luxadm probe
Found Enclosure(s):
SENA Name:f Node WWN:508002000008cb78
Logical Path:/dev/es/ses2
Logical Path:/dev/es/ses3
Found Fibre Channel device:
Node WWN:50020f2000000baf Device Type:Disk device
Logical Path:/dev/rdsk/c1t1d0s2
$ luxadm display /dev/es/ses3 | more
SENA
DISK STATUS
SLOT FRONT DISKS (Node WWN) REAR DISKS (Node WWN)
0 On (O.K.) 2000002037a1ac92 On (Bypassed:AB)
1 On (O.K.) 2000002037a1ae54 On (O.K.) 2000002037a1ac5d
2 On (O.K.) 2000002037a1aca4 On (O.K.) 2000002037a1ad33
3 On (O.K.) 2000002037a1ada9 On (O.K.) 2000002037a1a56e
4 On (O.K.) 2000002037a1ade7 On (O.K.) 2000002037a1ae67
5 On (O.K.) 2000002037a1ae8c On (O.K.) 2000002037a1a94f
6 On (O.K.) 2000002037a1adf4 On (O.K.) 2000002037a1a34b
SUBSYSTEM STATUS
FW Revision:1.09 Box ID:3 Node WWN:508002000008cb78 Enclosure Name:f
Power Supplies (0,2 in front, 1 in rear)
0 O.K.(rev.-02) 1 O.K.(rev.-02) 2 O.K.(rev.-02)
Fans (0 in front, 1 in rear)
0 O.K.(rev.-04) 1 O.K.(rev.-00)
ESI Interface board(IB) (A top, B bottom)
A: O.K.(rev.-04)
GBIC module (1 on left, 0 on right in IB)
0 O.K.(mod.-05)
1 Not Installed
B: O.K.(rev.-04)
GBIC module (1 on left, 0 on right in IB)
0 Failed(mod.-05): Not receiving a signal
1 Not Installed
Disk backplane (0 in front, 1 in rear)
Front Backplane: O.K.(rev.-04)
Temperature sensors (on front backplane)
0:39ºC 1:37ºC 2:36ºC 3:36ºC 4:36ºC 5:37ºC
6:37ºC (All temperatures are NORMAL.)
Rear Backplane: O.K.(rev.-04)
Temperature sensors (on rear backplane)
0:37ºC 1:39ºC 2:37ºC 3:37ºC 4:37ºC 5:39ºC
6:39ºC (All temperatures are NORMAL.)
Interconnect assembly
O.K.(rev.-02)
Loop configuration
Loop A is configured as a single loop.
Loop B is configured as a single loop.
Language USA English
Dave Foster
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
David Foster National Center for Microscopy and Imaging Research
Programmer/Analyst University of California, San Diego
dfoster@ucsd.edu Department of Neuroscience, Mail 0608
(858) 534-7968 http://ncmir.ucsd.edu/
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
"The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable." -- George Bernard Shaw
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:12 EDT