Network connectivity between Server with 1 NIC and Server with 2 NIC's

From: Caparroso, Nelson T. (AAS) (Nelson.T.Caparroso@sbcdo.com)
Date: Fri Apr 12 2002 - 14:55:06 EDT


We've two networks 130.8.100.0 (public network) and 10.0.10.0 (private
network). ServerA has one interface and is only connected to the public
network. ServerB and ServerC are both connected to the public network as
well as the private network. Communication between the Server B and C occurs
through the private network using static routes. However communication
between ServerA which only has a lone NIC connected to the public network is
terribly poor.

What could be the problem. The networks are VLAN's on a CISCO Catalyst
switch. My NIC's (qfe's, hme's eri's) are not autonegotaiting but are fully
matched with the CISCO's ports...

Thanks.

_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:12 EDT