From: Arley Barros Leal (arley.leal@sonae.com)
Date: Tue Mar 28 2006 - 10:43:59 EST
Hi MTK,
Two possible scenarios:
1) Pix is an IPsec end-point.
In this scenarios pix will reply only if "isakmp enable interface-name" is set.
2) Pix is forwarding isakmp UDP500 to an internal IPsec end-point.
In this scenario behavior may vary if the forwarded system has isakmp up and running or not.
My guess is that your pix is forwarding ISAKMP to an internal host (a VPN server probably), that would explain those different scan results.
Try looking on the config for a static mapping like this:
static (inside,outside) udp interface 500 internal_host 500 netmask 255.255.255.255 0 0
Cheers,
Arley
-----Original Message-----
From: mtk@mrc.dk [mailto:mtk@mrc.dk]
Sent: segunda-feira, 27 de Março de 2006 8:45
To: pen-test@securityfocus.com
Subject: Security test of firewall dose not show UDP port 500 is open
Hi all,
We have been using Nessus for security scanning the Cisco Pix firewalls we install for our custemers. I have one "old" repport showing ISAKMP UDM port 500 is open. The firewall isn't updated but now the port has disapeard fro the new rapport?
We have asked Cisco if the securiyt scanner is supposed to find UDP port 500 (I don't think so) and a CCIE from Cisco have told us "no the port is hidden."
I wonder how the port can be in the old repport?
If any one has any input please let me know.
Best regards,
MTK
------------------------------------------------------------------------------
This List Sponsored by: Cenzic
Concerned about Web Application Security?
As attacks through web applications continue to rise, you need to proactively protect your applications from hackers. Cenzic has the most comprehensive solutions to meet your application security penetration testing and vulnerability management needs. You have an option to go with a managed service (Cenzic ClickToSecure) or an enterprise software (Cenzic Hailstorm).
Download FREE whitepaper on how a managed service can help you:
http://www.cenzic.com/forms/ec.php?pubid=10025
And, now for a limited time we can do a FREE audit for you to confirm your results from other product. Contact us at request@cenzic.com
------------------------------------------------------------------------------
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:55:45 EDT