From: Jeff Shawgo (jeff.shawgo@verizon.net)
Date: Fri Aug 05 2005 - 10:17:02 EDT
> You need to be logged in as an Administrator to install hardware
> devices, by default, in Windows... And this kind of attack has been
> around for years (a small few-MB stick is overkill for a small script
> calling a local exploit and then running, say, pwdump2, and then
> bmail-ing the output to a remote mail server <total required size =
> about 50k>)...
>
> J. Theriault
> administrator@maginetworks.com
Actually, you only need to have Admin rights to add a "NEW" driver to a system. If you are utilizing one that is included with Windows by default (like many ATAPI CD devices use) then you are using one already present, and don't need rights. Kind of like adding and removing a CD drive from a bay in a laptop.
The same goes for USB drivers (and printer drivers). If it's in the default Windows driver.cab (I belive) then you're golden. When you add a new device to a machine, sometimes you need to provide a driver, and sometimes you don't. That's why.
~Jeff
------------------------------------------------------------------------------
FREE WHITE PAPER - Wireless LAN Security: What Hackers Know That You Don't
Learn the hacker's secrets that compromise wireless LANs. Secure your
WLAN by understanding these threats, available hacking tools and proven
countermeasures. Defend your WLAN against man-in-the-Middle attacks and
session hijacking, denial-of-service, rogue access points, identity
thefts and MAC spoofing. Request your complimentary white paper at:
http://www.securityfocus.com/sponsor/AirDefense_pen-test_050801
-------------------------------------------------------------------------------
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:54:42 EDT