From: Chuck (chuck.lists@gmail.com)
Date: Wed Jul 27 2005 - 10:04:18 EDT
I would guess that most of these access points would have ports 80
and/or 443 open for management. So you could get down to a short list
by scanning for those ports (assuming your network doesn't have a
whole bunch of other web servers). You could do this with nmap, if
that takes too long, with scanrand. Nmap can use a file full of
networks to scan with the -iL switch, so you don't have to scan the
whole Class A.
Then, when you have a list of systems with those ports open, you run a
little banner grabber script to do a HEAD or GET on each server and
you should be able to identify what they are from the Server: header.
If this doesn't give enough info, just pull up the page in a browser.
If they don't have a web interface available to your side of the
network (which would be the case if they are a home router/firewall/ap
type of device) you could try OS fingerprinting the network with nmap
or xprobe, but that will take a while and these devices probably won't
respond so that may not be easy. You may be able to identify these
devices by the fact that they don't respond, but you would have to
know the IP is in use from DHCP logs or traffic analysis. If there
are large enough broadcast domains or if you have IDSs deployed or are
using DHCP, you may be able to identify these devices by MAC
addresses, but again, most of these devices can spoof their MAC. In
short, it may be easier to wardrive/walk around your area if the
network is in one physical location.
Good luck.
Chuck
On 7/26/05, Jonathan Gauntt <jon0966@yahoo.com> wrote:
> Hi,
>
> I have been tasked with the project of scanning and identifying all non
> Cisco wireless access points within the company's network.
>
> We have about 800 /22 and /24 subnets, and because of the IP addressing
> scheme in place, might just be easier for me to scan the whole class A range
> of IP's.
>
> I have access to Nessus and GFI Security Scanner. Since we over 8000 IP's
> in place, does anyone have any advice on the best way to identify these non
> Cisco AP's such as Linksys and Netgear, etc.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:54:38 EDT