From: Sahir Hidayatullah (sahirh@mielesecurity.com)
Date: Fri Jul 22 2005 - 00:33:03 EDT
>> I am currently looking for a tool that will scan a couple of networks and
>> get the following infos from each machine up: OS, RAM, Hard Disk capacity
>> and so on. I obviously can run this tool with admin rights. The best
>> would be a command-line tool that will allow me to include it in a
script.
If you're looking only at Windows systems, there's a native Windows tool
called 'systeminfo' that runs from the command line so you can script it. It
can be used remotely, assuming admin rights. Here is some sample output:
C:\>systeminfo /S 10.10.10.55
Host Name: CELTIC
OS Name: Microsoft Windows XP Professional
OS Version: 5.1.2600 Service Pack 1 Build 2600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Uniprocessor Free
Registered Owner: x
Registered Organization: x
Product ID: x
Original Install Date: x
System Up Time: 0 Days, 1 Hours, 1 Minutes, 36 Seconds
System Manufacturer: INTEL_
System Model: D845GVS1
System type: X86-based PC
Processor(s): 1 Processor(s) Installed.
[01]: x86 Family 15 Model 4 Stepping 1
BIOS Version: INTEL - 20040216
Windows Directory: C:\WINDOWS
System Directory: C:\WINDOWS\System32
Boot Device: \Device\HarddiskVolume1
System Locale: en-us;English (United States)
Input Locale: en-us;English (United States)
Time Zone: (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi
Total Physical Memory: 510 MB
Regards,
Sahir Hidayatullah
Technical Consultant - Information Security
------------------------------
MIEL e-Security Pvt. Ltd.
C- 611 / 612, Floral Deck Plaza,
MIDC Central Road, Andheri (E),
Mumbai 400 093, India.
Tel No:+ 91 (022) 2821 5050
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:54:37 EDT