RE: generating a network map

From: Steve Goldsby (ICS) (sgoldsby@integrate-u.com)
Date: Sun Jun 19 2005 - 13:42:59 EDT


This has all changed significantly since Microsoft acquired Visio.
Visio Enterprise used to include the SNMP mapping tool that
auto-generated Visio maps. We have successfully used Visio 2002
Enterprise to map statewide WANs of over 1700 networks, 35k+ nodes.

With Visio 2003 and beyond, however, that functionality is gone. In
order to map networks with Visio, you have to purchase Fluke's
LanMapShot tool for about $300. The tool will do SNMP scans given your
constraints, map interface names, speeds, types, router/switch info,
etc. and then build a visio map based on that data.

It's not as well integrated as the old Visio 2002 tool, nor is it as
flexible, but it does do a good job. Be aware that it will generate
very cluttered maps if you have a large network, requiring a ton of
hand-editing time.

Best of luck.

Steve Goldsby

-----Original Message-----
From: Richard Zaluski [mailto:rzaluski@ivolution.ca]
Sent: Saturday, June 18, 2005 8:47 PM
To: 'Talha'; pen-test@securityfocus.com
Subject: RE: generating a network map

Visio Enterprise will also generate network maps. Its not open source
but I have seen it in operation and seems to get the job done.

http://www.windowsitpro.com/Windows/Article/ArticleID/5404/5404.html

Richard Zaluski
CISO, Security and Infrastructure Services iVOLUTION Technologies
Incorporated
905.309.1911
866.601.4678
www.ivolution.ca
rzaluski@ivolution.ca
 

Key fingerprint = DB39 7FC3 1F5D AD94 85DD 78B0 774D 5DE5 B011 BD8C
=======================================================================
CONFIDENTIALITY NOTICE: This email message, including any
attachments, is for the sole use of the intended recipient(s) and may
contain confidential and privileged information. If you are not the
intended recipient, please contact the sender. Any unauthorized review,
use, disclosure, or distribution is prohibited.
=======================================================================
-----Original Message-----
From: Talha [mailto:tt83x@yahoo.com]
Sent: Saturday, June 18, 2005 1:31 AM
To: pen-test@securityfocus.com
Subject: generating a network map

Hello there,
I am looking for a software that can generate or
reconstruct a network topology from raw data obtained
from live network capturing or offline tcpdump capture
files.

Also if theres any utility (preferably open source)
than can generate a network map from nmap logs.

any help will be highly appreciated

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com



This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:54:25 EDT