Re: Lan access via wifi

From: Sherwyn Williams (sherwill22@tmail.com)
Date: Mon Jun 06 2005 - 14:05:52 EDT


The thing is that is did that already, I stated that in my first post. I
did a nmap and noticed that all the internal host are filtered by some
firewall. I have access to the wireless router and I open up the
internal host by pointing them to the dmz side of the router. I did a
nessus scan and also and got no usefull info. So
Is why my next step was to try a unc shared access by doing \\.\x:\ but
that did not gave me any useful info.

That is why I email the list.

On Mon, 6 Jun 2005 13:37, Brian W Baker wrote:
> Not that I'm against learning, as we've all been there, and learned
> from
> some of the best. What gets me, is that you're on a
> "pentest"...enumeration should be your next step, nmap at least, then
> nessus, at least...once you get in the network via wireless, it would
> be
> the same as what I presume you've already done on the rest of the
> pentest (wired side). Are you working with someone else on this
> pentest?
>
> I'm not trying to be "ugly", I'm just saying what I'm sure a lot of the
> rest of the list didn't say...
>
>
>
> Sherwyn Williams wrote:
>> Kidding with what my question, what is this the
>> Professional corner of the list, ok professors if you are tired of
>> teaching you can go back to solving world peace I totally get it. I
>> should try www.google right thanks a lot to everyone who did took timr
>> to answer my quetion
>>
>> On Mon, 6 Jun 2005 12:49, Brian W Baker wrote:
>>
>>> You're kiddin, right?
>>>
>>>
>>>
>>> Sherwyn Williams wrote:
>>>
>>>> Senerio:
>>>>
>>>> Doing a pentest, the client has a wifi router that is not
>>>> encrypted and
>>>> is gaving out dhcp address to any wifi client with a compatible card.
>>>> Now my question is once I received a ip address, and I pinged a few
>>>> internal clients , how would be a good way for me to gain access to
>>>> these internal network.
>>>>
>>>> I tried //ipaddress/ because there is no machine name in the dhcp
>>>> routing table. Could not connect that way, I even tried to open up
>>>> certain ports via putting the machine on the router dmz and did a
>>>> scan
>>>> with the secuirty features disable, but still there is no open ports.
>>>>
>>>> Thanks in advance.
>>>>
>>>>
>>>>
>>>> Sherwyn Williams
>>>> Technical Consultant
>>>> (917) 650-5139
>>>> Sherwill22@tmail.com
>>>>
>> Sherwyn Williams
>> Technical Consultant
>> (917) 650-5139
>> Sherwill22@tmail.com
>>
Sherwyn Williams
Technical Consultant
(917) 650-5139
Sherwill22@tmail.com



This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:54:22 EDT