From: Meidinger Chris (chris.meidinger@badenit.de)
Date: Mon Dec 08 2003 - 09:28:39 EST
Small tip: nmap version 3.40 or newer has an option -sV, which is service
verification. It will fire a lot of different packets at the port trying to
get a bead on what is behind it. Did you try that?
Chris Meidinger
-----Original Message-----
From: Beaty, Bryan [mailto:Bryan.Beaty@vector.com]
Sent: Sunday, December 07, 2003 6:21 PM
To: pen-test@securityfocus.com
Subject: Service Identification
I port scanned a box I am working on. I know the box is some form of
Linux. I see that port 23,25 and 53 are open. I can identify 53 as DNS.
Both NMAP and AMAP identify it as DNS.
Port 23 and 25 are open but cannot be identified by AMAP or NMAP. When I
telnet <ip> 23 or 25 I get a blank screen. If I type I just get blank
spaces or underscore symbols on the screen.
Does this mean the telnet and SMTP server have crashed?
Could it be that someone has installed some other service on these
ports?
How do you identify services that respond like this? Seems like I run
into this from time to time but I never have learned how to deal with
it.
Any ideas what to do at this point? I do not have physical access to the
box.
Thanks,
Bryan Beaty
---------------------------------------------------------------------------
----------------------------------------------------------------------------
---------------------------------------------------------------------------
----------------------------------------------------------------------------
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:53:43 EDT