From: Ivan Coric (ivan.coric@workcoverqld.com.au)
Date: Sun Sep 21 2003 - 19:52:19 EDT
Hi,
My setup is the same, although I run RH 7.3.
You should be able to patch the orinoco drivers with orinoco-0.13e-patch.diff and then install the drivers. You also require the kernel source to be installed.
Once you have installed the drivers, issue this command "iwpriv eth0" and look to see if there is a line with monitor. If so your in business.
the site
http://airsnort.shmoo.com/orinocoinfo.html
cheers
Ivan
Ivan Coric
IT Technical Security Officer
Information Technology
WorkCover Queensland
Ph: (07) 30066414 Fax: (07) 30066424
Email: ivan.coric@workcoverqld.com.au
>>> "Mark G. Spencer" <mspencer@evidentdata.com> 09/20/03 01:05am >>>
I'm looking for advice on running AirSnort and Kismet on Red Hat 9 with an
Orinoco Gold. I tried to flash my firmware down to the 7.52 level as
recommended by the AirSnort website, but the firmware utility reports "no
wireless card driver found" on my XP notebook. So, I'm wondering if anyone
has used AirSnort and Kismet successfully with a firmware flashed up to the
8.72 release? The AirSnort website mentions 8.10 is likely a problem, but
I'm hoping 8.72 will magically work. ;)
I'll try it later today anyway, but if anyone has advice before I jump in,
it would be much appreciated. Last time I tried to get AirSnort running on
a Red Hat 9 notebook I totally killed it somehow after all the driver
patching and was never able to get wireless to work on that laptop again,
until a fresh install of the OS.
Thanks,
Mark
---------------------------------------------------------------------------
FREE Trial!
New for security consultants and in-house pros: FOUNDSTONE PROFESSIONAL
and PROFESSIONAL TL software. Fast, reliable vulnerability assessment
technology powered by the award-winning FoundScan engine. Try it free for 21 days at: http://www.securityfocus.com/sponsor/Foundstone_pen-test_030825 ----------------------------------------------------------------------------
***************************************************************************
Messages included in this e-mail and any of its attachments are those
of the author unless specifically stated to represent WorkCover Queensland. The contents of this message are to be used for the intended purpose only and are to be kept confidential at all times.
This message may contain privileged information directed only to the intended addressee/s. Accidental receipt of this information should be deleted promptly and the sender notified.
This e-mail has been scanned by Sophos for known viruses.
However, no warranty nor liability is implied in this respect.
**********************************************************************
---------------------------------------------------------------------------
----------------------------------------------------------------------------
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:53:40 EDT