Port Scanning Issues

From: crumdub12@gmail.com
Date: Mon Jun 25 2007 - 17:59:58 EDT

('binary' encoding is not supported, stored as-is) A Chairde,

   Havin, some issues with scanning stacks on my system.

1. Using Superscan4 , I scan stack UDP-TCP 1-65534 , Sometimes I
get no ports open , another time I get 49159 UDP Ports open, only get port report, no attempt made to open any ports ... , when get open ports , I always get 49159 UDP Ports ...... , use the scanner at 250msecs , takes around 16 hours to finish.

2. Using Languard, Nessus and Retina , get different scans from each tool, any ideas why, how do I find out real ports open.. differences can be 10,000 ports

------------------------------------------------------------------------
This List Sponsored by: Cenzic

Are you using SPI, Watchfire or WhiteHat?
Consider getting clear vision with Cenzic
See HOW Now with our 20/20 program!

http://www.cenzic.com/c/2020
------------------------------------------------------------------------

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:57:54 EDT