Re: PPPOE password sniffing

From: alexpheno@gmail.com
Date: Sat Jan 27 2007 - 16:42:52 EST


('binary' encoding is not supported, stored as-is) If you're using PAP as an authentication scheme you must look into the
packets that follow the PPPOE session, after you've found a PPPOE
access concentrator a PPP session is established. You must look for a
packet that is sent by the authenticating terminal (in this case your
computer) to the concentrator. Try to do a wireshark capture and
apply this filter rule "pap and eth.src==XX:XX:XX:XX:XX:XX", and
replace the x part with the terminal's mac address. If a frame matches
the filter it should contain the user and password in the payload.

Check out RFC1334 for more info.

--
Alex Nedelcu
CCNA, SNRS, CSVPN
------------------------------------------------------------------------
This List Sponsored by: Cenzic
Need to secure your web apps?
Cenzic Hailstorm finds vulnerabilities fast.
Click the link to buy it, try it or download Hailstorm for FREE.
http://www.cenzic.com/products_services/download_hailstorm.php?camp=701600000008bOW
------------------------------------------------------------------------


This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:57:33 EDT