Re: Fport and Psexec

From: Erwin van der Zwan (erwin.zwan-van-der@siemens.nl)
Date: Thu Aug 01 2002 - 08:16:42 EDT

('binary' encoding is not supported, stored as-is) In-Reply-To: <D2FAA4ADD8646F45BA5F287EA73E87224A73AE@rijsyexca.rbsint.com>

Fport 2.0 does not run on NT4 boxes, just on W2K. Just returns the header
info otherwise. Try Fport 1.33 and make sure the psapi.dll is in your
path. Works fine for me :-)

EvdZ

> Dave wrote
>
>From a remote PC I am running psexec \\..cmd.exe on a NT 4 PDC. I have
admin
>privileges so I receive a cmd shell from the PDC. I then attempt to run
>Fport on the PDC, Fport runs but only gives me it's app header and no info
>on ports.
>
>I have also run this with system privileges and it still won't give me any
>info.
>
>Any thoughts?
>
>Thx
>
>Dave

----------------------------------------------------------------------------
This list is provided by the SecurityFocus Security Intelligence Alert (SIA)
Service. For more information on SecurityFocus' SIA service which
automatically alerts you to the latest security vulnerabilities please see:
https://alerts.securityfocus.com/

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:53:24 EDT