From: Prangnell, Ian (ian.prangnell@logicacmg.com)
Date: Fri Oct 27 2006 - 19:09:49 EDT
Hi,
Thank you all for you suggestions and advice.
This is how I got around the problem
1. Remove the current MC/SG set up 'cmdeleteconf'
After this when I ran the command below the error did not appear :-)
2. Applied the new configuration 'cmapplyconf'
All was well....Why I had to do this is a mystery, but at least it's
working now
Ian
________________________________
From: hpux-admin-owner@DutchWorks.nl
[mailto:hpux-admin-owner@DutchWorks.nl] On Behalf Of Prangnell, Ian
Sent: 23 October 2006 02:12
To: hpux-admin@DutchWorks.nl
Subject: [HPADM] MC/SG problem
Hi,
Has anybody come across the following error when checking MC/SG
(cmapplyconf) configuration -
Checking cluster file: /etc/cmcluster/psa1.ascii
Checking nodes ... Done
Checking existing configuration ... Done
Gathering configuration information ... Done
Gathering configuration information ... Done
Gathering configuration information ..
Gathering storage information ..
Found 16 devices on node psa1a
Found 16 devices on node psa1b
Analysis of 32 devices should take approximately 4 seconds
0%----10%----20%----30%----40%----50%----60%----70%----80%----90%----100
%
Found 3 volume groups on node psa1a
Found 3 volume groups on node psa1b
Analysis of 6 volume groups should take approximately 1 seconds
0%----10%----20%----30%----40%----50%----60%----70%----80%----90%----100
%
.....
Gathering Network Configuration ........ Done
Cluster psa1 is an existing cluster
Parsing package file: /etc/cmcluster/psa/psa.ascii.
cmcheckconf : Error found in package file:
/etc/cmcluster/psa/psa.ascii.
Package psa already exists. It will be modified.
Error: Unable to lookup run script /etc/cmcluster/psa/psa.sh on node
psa1a: Not owner
MC/SG is up and running but we need to change the heartbeat and every
time we check the config we get the above error? The 'daemons' log file
complains that 'user (root)' does not have the privileges to access this
file.....
We can 'rlogin' and use 'remsh' across the nodes with no problem.
HP/UX 11i running MC/SG A.11.16
Any ideas or pointers would be helpful, will summarise.
Regards,
Ian
This e-mail and any attachment is for authorised use by the intended
recipient(s) only. It may contain proprietary material, confidential
information and/or be subject to legal privilege. It should not be
copied, disclosed to, retained or used by, any other party. If you are
not an intended recipient then please promptly delete this e-mail and
any attachment and all copies and inform the sender. Thank you.
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:54 EDT