From: Stephanie C (stepchung@gmail.com)
Date: Wed Sep 20 2006 - 13:01:55 EDT
Thank you all. Most of you suggested to add the following line in
/etc/system and reboot the system.
set shmsys:shminfo_shmmax=536870912
I still do not get the anwser about 'how to display the current kernel
setting value".
Thanks again - Stephanie
The following is the responce from Jeff Lightner:
Coincidentally someone in the Netbackup mailing list just posted her system
file from a Solaris 9 box. I suspect similar settings would help OMNI back
though I've never used it. Unfortunately sun (at least through version 8)
didn't have a full tool like SAM. It did have Admintool and I don't recall
the things that will get to. On Sun you don't recompile the kernel when
you change parameters as you do on HP-UX. Just adding to /etc/system and
rebooting makes them take effect. It's been a couple of years since I
worked on Sun so do this at your own risk.
Here are my current Solaris /etc/system parameters:
set msgsys:msginfo_msgmap=512
set msgsys:msginfo_msgmax=8192
set msgsys:msginfo_msgmnb=65536
set msgsys:msginfo_msgmni=256
set msgsys:msginfo_msgssz=16
set msgsys:msginfo_msgtql=512
set msgsys:msginfo_msgseg=8192
set semsys:seminfo_semmap=64
set semsys:seminfo_semmni=1024
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmnu=1024
set semsys:seminfo_semmsl=300
set semsys:seminfo_semopm=32
set semsys:seminfo_semume=64
set shmsys:shminfo_shmmax=536870912
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=220
set shmsys:shminfo_shmseg=100
------------------------------
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:54 EDT