From: brian irvin (brian944us@yahoo.com)
Date: Tue Jun 20 2006 - 14:45:28 EDT
I am installing using ignite and get the following
error regarding HP term..
@(#) Ignite-UX Revision B.4.4.29
@(#) install/init (opt) $Revision: 10.277 $
* Scanning system for IO devices...
* Querying disk device: 1/0/0/3/0.6.0 ...
* Querying disk device: 1/0/1/1/0/1/1.6.0 ...
* Setting keyboard language.
NOTE:
The console firmware terminal type is
currently set to "hp". If you
are using any other type of terminal you will
see "garbage" on the
screen following this message.
If this is the case, you will need to either
change the terminal type
set in the firmware via GSP (if your GSP
firmware version supports
this feature), or change your terminal
emulation to match the
firmware. In either case you will need to
restart if your terminal and
the firmware terminal type do not match.
Press the 'b' key if you want to reboot now.
How would i correct this terminal type error?
Thanks
Brian
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:53 EDT