From: Kory Wheatley (wheakory@isu.edu)
Date: Wed Jun 14 2006 - 17:33:24 EDT
------------ Event Monitoring Service Event Notification ------------<
Notification Time: Wed Jun 14 01:09:08 2006
ux5 sent Event Monitor notification information:
/storage/events/disks/default/1_4_0_1.10.0 is >= 3.
Its current value is CRITICAL(5).
Event data from monitor:
Event Time..........: Wed Jun 14 01:09:07 2006
Severity............: CRITICAL
Monitor.............: disk_em
Event #.............: 100237
System..............: ux5.isu.edu
Summary:
Disk at hardware path 1/4/0/1.10.0 : Media failure
Description of Error:
The device was unsuccessful in reading or writing data for the current I/O
request due to an error on the medium. The data could not be recovered.
Probable Cause / Recommended Action:
Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is
removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced
a hardware failure. Contact your HP support representative to have the
device checked.
Additional Event Data:
System IP Address...: 134.50.250.6
Event Id............: 0x448fb61400000000
Monitor Version.....: B.01.00
Event Class.........: I/O
Client Configuration File...........:
/var/stm/config/tools/monitor/default_disk_em.clcfg
Client Configuration File Version...: A.01.00
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
0x448fb61300000000
Additional System Data:
System Model Number.............: 9000/800/N4000-36
OS Version......................: B.11.00
STM Version.....................: A.44.00
EMS Version.....................: A.03.20
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/scsi.htm#100237
v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v
Component Data:
Physical Device Path...: 1/4/0/1.10.0
Device Class...........: Disk
Inquiry Vendor ID......: SEAGATE
Inquiry Product ID.....: ST318404LC
Firmware Version.......: HP04
Serial Number..........: 3BT1SKBB00007121JYYP
Product/Device Identification Information:
Logger ID.........: sdisk
Product Identifier: SCSI Disk
Product Qualifier.: SEAGATEST318404LC
SCSI Target ID....: 0x0A
SCSI LUN..........: 0x00
I/O Log Event Data:
Driver Status Code..................: 0x0000007C
Length of Logged Hardware Status....: 22 bytes.
Offset to Logged Manager Information: 24 bytes.
Length of Logged Manager Information: 34 bytes.
Hardware Status:
Raw H/W Status:
0x0000: 00 00 00 02 F0 00 03 01 F7 89 5F 0A 00 00 00 00
0x0010: 11 00 E4 80 00 82
SCSI Status...: CHECK CONDITION (0x02)
Indicates that a contingent allegiance condition has occurred. Any
error, exception, or abnormal condition that causes sense data to be
set will produce the CHECK CONDITION status.
SCSI Sense Data:
Undecoded Sense Data:
0x0000: F0 00 03 01 F7 89 5F 0A 00 00 00 00 11 00 E4 80
0x0010: 00 82
SCSI Sense Data Fields:
Error Code : 0x70
Segment Number : 0x00
Bit Fields:
Filemark : 0
End-of-Medium : 0
Incorrect Length Indicator : 0
Sense Key : 0x03
Information Field Valid : TRUE
Information Field : 0x01F7895F
Additional Sense Length : 10
Command Specific : 0x00000000
Additional Sense Code : 0x11
Additional Sense Qualifier : 0x00
Field Replaceable Unit : 0xE4
Sense Key Specific Data Valid : TRUE
Sense Key Specific Data : 0x80 0x00 0x82
Sense Key 0x03, MEDIUM ERROR, indicates that the command terminated
with a nonrecovered error condition that was probably caused by a
flaw in the medium or an error in the recorded data. This sense key
may also be returned if the device is unable to distinguish between a
flaw in the medium and a specific hardware failure (sense key 0x04).
For the RECOVERED ERROR, HARDWARE ERROR, or MEDIUM ERROR Sense Key,
the Sense Key Specific data indicates that 130 retries were
attempted.
The combination of Additional Sense Code and Sense Qualifier (0x1100)
indicates: Unrecovered read error.
SCSI Command Data Block:
Command Data Block Contents:
0x0000: 28 00 01 F7 89 00 00 00 70 00
Command Data Block Fields (10-byte fmt):
Command Operation Code...(0x28)..: READ
Logical Unit Number..............: 0
DPO Bit..........................: 0
FUA Bit..........................: 0
Relative Address Bit.............: 0
Logical Block Address............: 32999680 (0x01F78900)
Transfer Length..................: 112 (0x0070)
Manager-Specific Data Fields:
Request ID.............: 0x076CC1C0
Data Residue...........: 0x00002200
CDB status.............: 0x00000002
Sense Status...........: 0x00000000
Bus ID.................: 0x07
Target ID..............: 0x0A
LUN ID.................: 0x00
Sense Data Length......: 0x12
Q Tag..................: 0x7B
Retry Count............: 7
---------- End Event Monitoring Service Event Notification ----------<
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:53 EDT