From: Daniel Keisling (daniel.keisling@austin.ppdi.com)
Date: Tue Jan 10 2006 - 10:33:50 EST
Admins,
I have several N4000 machines connected to an HP EVA5000 SAN. While
watching glance, it constantly shows 100% disk utilization for the disk
that is connected to the SAN. I get around 3500 I/O's per second, but I
know it can do more. I'm assuming glance just doesn't know how much the
SAN can send (neither do I), so it's reporting the utilization
incorrectly. Is there anyway I can fix this? I do know the machine has
not been patched in quite awhile.
Thanks,
Daniel
______________________________________________________________________
This email transmission and any documents, files or previous email
messages attached to it may contain information that is confidential or
legally privileged. If you are not the intended recipient or a person
responsible for delivering this transmission to the intended recipient,
you are hereby notified that you must not read this transmission and
that any disclosure, copying, printing, distribution or use of this
transmission is strictly prohibited. If you have received this transmission
in error, please immediately notify the sender by telephone or return email
and delete the original transmission and its attachments without reading
or saving in any manner.
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:51 EDT