From: BAKHSHESH Kazem (BAKHSHEK@ESSILOR.fr)
Date: Thu Nov 03 2005 - 11:12:49 EST
Sorry,I have forget to activate the vg.
I think is better that I go drink some ?????
Thanks
-----Message d'origine-----
De : Donald.J.Manley@chase.com [mailto:Donald.J.Manley@chase.com]
Envoyé : jeudi 3 novembre 2005 16:45
À : BAKHSHESH Kazem
Objet : Re: [HPADM] RE: SAN: Needs help
I don't see where you activated the volume group.
You need vgchange -a y /dev/bcv_690
- Don
BAKHSHESH Kazem
<BAKHSHEK@ESSILOR.f To:
hpux-admin@dutchworks.nl
r> cc:
Sent by: Subject: [HPADM] RE: SAN:
Needs help
hpux-admin-owner@du
tchworks.nl
11/03/2005 10:13 AM
Hi admins,
I could associate 3 BCV to the STD and the synchronization is succes Now I'm
trying to associate the BCV 690 to the bcv_699 by
1: mkdir /dev/bcv_699
2: mknod /dev/bcv_699/group c 64 0x150000
3: vgchgid /dev/rdsk/c6t8d3
4: vgimport -v /dev/bcv_690 /dev/rdsk/c6t8d3 Ok vg is created with the exact
lvol
When I do
fsck -F vxfs -y /dev/bcv_690/lvol1
vxfs fsck: Cannot open /dev/bcv_690/lvol1: No such device or address file
system check failure, aborting ...
Can you please advise me where I'm wrong ================= Here the out put
of symmir query -multi ===============================
Device Group (DG) Name: ProdBgrp
DG's Type : REGULAR
DG's Symmetrix ID : 000287890560
Standard Device BCV Device State
-------------------------- -------------------------------------
------------
& Inv. Inv.
Logical Sym Tracks Logical Sym Tracks STD <=>
BCV
-------------------------- -------------------------------------
------------
c6t8d4 088C 0 c6t8d2 068C * 0
Synchronized
0 c6t8d1 0688 * 0
Synchronized
0 c6t8d3 0690 * 0 Split
Total ------ p; -------
MB(s) 0.0 0.0
De : O'Donovan, Kevin [mailto:Kevin.O'Donovan@acs-inc.com]
Envoyé : mercredi 2 novembre 2005 18:33
À : BAKHSHESH Kazem
Objet : RE: [HPADM] SAN: Needs help
Are you using EMC disks, or what SAN are you using? Its different for each.
Is that a device group you have setup?
I've attached my 'cheat sheet' for creating device groups, adding std luns
and bcv luns, for EMC. Note you need Timefinder / SYMAPI installed.
Hopefully it's what you're after.
-----Original Message-----
From: hpux-admin-owner@DutchWorks.nl
[mailto:hpux-admin-owner@DutchWorks.nl] On Behalf Of BAKHSHESH Kazem
Sent: 02 November 2005 12:15
To: hpux-admin@DutchWorks.nl
Subject: [HPADM] SAN: Needs help
Hi admins;
For the backup of our buisness, I'm looking to use 3 couple of
BCV(incremental backup)
Actually I have my test_dg is based on
STD BCV
88C 688
How can I synchronize the STD with another BCV ?
Is it possible ?
Thanks for all help
Cordialement(Best regards)
Kazem Bakhshesh(Administrateur Système : HP-UX)
E-Mail : bakhshek@essilor.fr
Tel : 01.72.94.73.09
-- ---> Please post QUESTIONS and SUMMARIES only!! <--- To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only) http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:50 EDT