From: Jim Gray (grayj@erinet.com)
Date: Wed May 04 2005 - 20:55:44 EDT
Thanks to all who responded. Here's what I did per
Tom Myers' guidance:
Umount the volumes in the volume group.
Umount /dev/vg02/lvolx
Deactivate the volume group
# /usr/sbin/vgchange -a n vg02
Wrote the LVM information to the new drive using vgcfgrestore:
# /usr/sbin/vgcfgrestore -n vg02 /dev/rdsk/c0t3d0 (here's the importance of
using vgcfgbackup)
Re-activated the volume group:
# /usr/sbin/vgchange -a y vg02
-----Original Message-----
From: hpux-admin-owner@DutchWorks.nl [mailto:hpux-admin-owner@DutchWorks.nl]
On Behalf Of Jim Gray
Sent: Wednesday, May 04, 2005 11:30 AM
To: hpux-admin@DutchWorks.nl
Subject: [HPADM] replacing bad disk in physical volume
We have a D390 running 10.20 that has a volume group comprised of PV1 and
PV2. The volume group vg02 using PV2 and is striped and
mirrored. c0t3d0 is part of PV2 and died, but the volume group is
still working. What is the correct procedure for removing the bad disk from
physical volume, replacing it with a new disk, and re- establishing the
extents. Thanks in advance. Will summarize.
Jim Gray
jimgray@woh.rr.com
Cellular (937)-470-8188
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact
majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner:
owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse
only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse &
search)
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:47 EDT