From: James J. Perry (jjperry@water.com)
Date: Wed May 04 2005 - 11:08:08 EDT
I would guess it would be compatible. I have pulled memory from K260s
and put it in K360s and a K580. It is all generally the same ECC
memory, so it should work. Just try to make sure that you match you
memory coming in to be in a/b slots. I/e One simm in 6a the other in 6b.
This should resolve possible parity issues.
In my limited hardware reconfig experience (all of our K-class are in
archive/read only now) I have found that the SIMMs are about the same.
I also know that someone took K-100 memory and got it working in a
K-200.
-Jim
-----Original Message-----
From: hpux-admin-owner@DutchWorks.nl
[mailto:hpux-admin-owner@DutchWorks.nl] On Behalf Of IlicR@stentor.ca
Sent: Wednesday, May 04, 2005 10:17 AM
To: hpux-admin@dutchworks.nl
Subject: [HPADM] memory question
Due to some unusual situation I have to swap some memory from K 410 to K
420.
This is just temporarily solutions until some work on rp* servers is
done.
Is this memory compatible or not ? TX in advance for any response.
PS I know everything is so old..
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact
majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner:
owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse
only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse &
search)
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:47 EDT