[HPADM] SUMMARY: ENWARE Software

From: Henning, Thomas B (thomas.b.henning@usa-spaceops.com)
Date: Thu Dec 16 2004 - 07:09:40 EST


Thanks are due to:

Andy Cranston
Marc Ahrendt
IlicR@<deleted rest of the address>
Ryan Green
James Abbuhl

And especially to Jeff Lightner for the definitive answer, which I quote completely below.

It seems that while I searched the mailing list's archives, I forgot to search on the HP forums. This question had been asked on the forums, and the
complete answer can be found at the link in Jeff's email. I have tried the second solution, copying the /opt/hpxt tree to the 11i system, and so far so
good.

Jeff's Answer:

Essentially the same question with answers exists in the HP ITRC forum. Since I'm not sure I can post the details I'll just send you the link.
<http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=596597>
You may need to register at the site to view it.
NOTE: I don't know that the solution mentioned in the link works - just passing it on in response to your question. Use it at your own risk

Original Question:

I am updating system to 11i from 10.20, and at the same time attempting to install a new rp2470 server. I have several users who interface to the system via
X-terminals, HP Envizex-II's.
Two questions:
1. Is the ENWARE software still available anywhere from HP? My search on the HP web site for the terms ENWARE, ENVEZIX, and X-terminal came up blank.
2. If I can find my older copy of it, from the previous system, will it run under 11i? I know must packages will port from 10.20 to 11i without trouble, but
still there is a chance it will not.
And of course, I will summarize the results.

Thomas B. Henning
United Space Alliance
Ground Operations
Wave Analysis Lab
(321)861-4234
thomas.b.henning@usa-spaceops.com

Opinions expressed are my own and do not reflect those of my employer or NASA.

--
             ---> Please post QUESTIONS and SUMMARIES only!! <---
        To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
       Name: hpux-admin@dutchworks.nl     Owner: owner-hpux-admin@dutchworks.nl
 
 Archives:  ftp.dutchworks.nl:/pub/digests/hpux-admin       (FTP, browse only)
            http://www.dutchworks.nl/htbin/hpsysadmin   (Web, browse & search)


This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:45 EDT