From: Greg Rudd (G.Rudd@isu.usyd.edu.au)
Date: Tue Sep 21 2004 - 21:38:12 EDT
-----BEGIN PGP SIGNED MESSAGE-----
The solution was that the machine was resolving the name oriana incorrectly to
the ip address that it has outside the firewall. What I did was make some
the right changes to the /etc/resolv.conf file. Silly me!!
- -----ORIGINAL MESSAGE-----
Hi all
At the sudgestion of a number of posters on this list I have stopped and
started the swagentd, without successbut I do get the following message when
I restart the swagentd.
# /sbin/init.d/swagentd stop
The swagentd daemon is stopped.
# /sbin/init.d/swagentd start
Running /usr/lib/sw/mx/configure to reset hostname.
#
Is it the case that the machine is behind a firewall the with only ssh being
allowed to talk to the outside world, a possible cause of the problem.
I have had a look at my /etc/hosts , /etc/resolv.conf and the /etc/routes
file and everything appears to be in order.
- - -----ORIGINAL MESSAGE-----
Hi All
When I try to apply the quality patches for for our new Itanium box
I am getting the following message when running the create_depot_hp-ux_11
script
Verifying the depot.
======= 09/21/04 14:57:35 EST BEGIN swverify SESSION
(non-interactive) (jobid=oriana-0034)
* Session started for user "root@oriana".
* Beginning Selection
ERROR: RPC exception: "Communications failure (dce / rpc)" 09/21/04
14:59:27 EST
ERROR: A Remote Procedure Call to a daemon has failed. Could not
start a management session for
"oriana:/usr/local/patches/depot". Make sure the host is
accessible from the network, and that its daemon, swagentd, is
running.
* Target connection failed for
"oriana:/usr/local/patches/depot".
ERROR: More information may be found in the daemon logfile on this
target (default location is oriana:/var/adm/sw/swagentd.log).
* Selection had errors.
======= 09/21/04 14:59:27 EST END swverify SESSION (non-interactive)
(jobid=oriana-0034)
ERROR: swverify of depot failed.
ERROR: Errors were found while building depot.
Although when I look through this log everything appears ok with nothing
listed in the tail of the log.
Am I doing something silly here or what???
I seen some other person having this same problem before but didn't sumarise
their reply.
Patch Name: hpux_800_11.23_09201029.tar
OS HPUX-11iv2
Hardware rx4640
Thanks in advance -greg
- -----BEGIN PGP SIGNATURE-----
Version: PGP 6.5.8
iQEVAwUBQVDHrKVYGvwczkMvAQF3jQf8CrYTcJLtj92P+60vUfGZ234SKvRuIisy
kGLAU2E+vDeix2k/iKvtZC0pVr6byO0u6bgZHKVAEYl0+n9kmhAzpgY1l9yCNUSF
LA7uGM2K30X1TI7WAsBsa52bE7nwoIq+vXOdAbnjCclQhCnu7Z2pSwRc1WigD6l8
T1665xQdIDiMW2/e5AFuJheyDslW4kQSSGdrRVv47wVKEr2eIOl4dYRLJnWIoXmo
6jheArOGX1yX7v0MP6K9eSy8HLtV8ka6b6DxmAJoJraY746mwk9yTfQVStz8JfvY
Ow8KYmjplop4g/FUwoyxIdlpsgoMEBmACNmXHotpUfR/cpWQqZ+Zww==
=TYW3
- -----END PGP SIGNATURE-----
- --
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact
majordomo@dutchworks.nl Name: hpux-admin@dutchworks.nl Owner:
owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse
only) http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
- -------------------------------------------------------
-----BEGIN PGP SIGNATURE-----
Version: PGP 6.5.8
iQEVAwUBQVDXhKVYGvwczkMvAQH7QAf/Xf0QAUHe7AXATIWGCFh+fMoGrn9W8Zc7
gdA0nYVpjyKOrTfMSjpYAoZ/3hvkPjqMztOtGqAUmWPEKUcTE8l3x3OI0S8ADVuC
uTxbBKfPIr/Gp5zEBeY1XUZ+dBciZA7ro1MDOSE9Ey5Dul5vIiViUfoCblNCDHoy
9lrMXJX0l+9VJO+kNPR5BhcxKIErUXv2EwsllLWzxjkZ2UP0uZtvn+JVLETSAMjP
JKjsFe4U8/X1oDqmKqV0/lXlZWh7jsFmekFLIdC50oEl8czaJEQj71Y3ctQ3pysa
z4Ssn9DHiHwaMImjcEWU+TY0vRkzHBNXASQLOtYwcc0GjqLZKnzp+g==
=1jNt
-----END PGP SIGNATURE-----
-- ---> Please post QUESTIONS and SUMMARIES only!! <--- To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only) http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:43 EDT