From: Scalone, Galen (Galen.Scalone@vacationclub.com)
Date: Fri Jul 16 2004 - 12:14:07 EDT
Listers,
Here is the setup:
We have a cx600, and an fc4700 in a SAN, dual attached, switched. It has
both NT, and HPUX hosts. The cli commands from NT work fine, and from
the HP hosts to the FC4700. If I try to CLI to the CX600, from an HPUX
host, the command hangs, no other CLI or NaviGUI commands will run, and
the SP goes to Unmanaged. Have had a call open for over a week with EMC,
and they are still fighting it too.
> -----Original Message-----
> From: Scalone, Galen
> Sent: Friday, July 16, 2004 11:48 AM
> To: 'hpux-admin@dutchworks.nl'
> Subject: HP, and Clariion disk array
>
>
> Hi List,
> Is anyone out there running HPUX 11.x, and using an EMC Clariion CX600
> disk array, where the CLI commands actually work?
>
-- ---> Please post QUESTIONS and SUMMARIES only!! <--- To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only) http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:42 EDT