From: Arunvijai (arun_unix@yahoo.co.uk)
Date: Tue Mar 30 2004 - 05:45:59 EST
Hello Admins,
I am trying to install HPUX 11.11 OS on 9000 Series server from external DVD-ROM device.
I got following messages and couldnt able to proceed with installation.
====================================================
alloc_pdc_pages: Relocating PDC from 0xf0f0000000 to 0x7fa00000.
gate64: sysvec_vaddr = 0xc0002000 for 2 pages
NOTICE: nfs3_link(): File system was registered at index 4.
NOTICE: autofs_link(): File system was registered at index 6.
NOTICE: cachefs_link(): File system was registered at index 7.
System Console is on the Built-In Serial Interface
Swap device table: (start & size given in 512-byte blocks)
entry 0 - auto-configured on root device; ignored - no room
WARNING: no swap device configured, so dump cannot be defaulted to primary swap.
WARNING: No dump devices are configured. Dump is disabled.
Starting the STREAMS daemons-phase 1
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 2097152 Kbytes, lockable: 1555968 Kbytes, available: 1802336 Kbytes
======= 03/30/04 04:22:55 EST HP-UX Installation Initialization. (Tue Mar 30
04:22:55 EST 2004)
@(#) Ignite-UX Revision B.4.2.108
@(#) install/init (opt) $Revision: 10.277 $
* Scanning system for IO devices...
* Querying disk device: 0/0/1/1.15.0 ...
NOTE: Primary path not currently set to an existing disk device.
* Setting keyboard language.
1I
NOTE:
The console firmware terminal type is currently set to "hp". If you
are using any other type of terminal you will see "garbage" on the
screen following this message.
If this is the case, you will need to either change the terminal type
set in the firmware via GSP (if your GSP firmware version supports
this feature), or change your terminal emulation to match the
firmware. In either case you will need to restart if your terminal and
the firmware terminal type do not match.
Press the 'b' key if you want to reboot now.
+---------------------+----------------+-------------------+15y23C[ 49C@26CB FIBnstall HP-UX50C]17y23C[ DRun a Recovery Shell ]19y23C[ DAdvanced Options50C]22y10C[ Re56C@15CDb@oot ]52C[ DHelp ]15y25C
0B1H1G1A1C0D1I0L0A999Y999Citool: Couldn't bring up the initial window. This may occur when
you specify an incorrect display.
itool: Awin-E-ScreenSize: asking for screen size failed
The user interface failed, would you like to restart it? ([y]/n):
=====================================================================================
If you have any installation steps to follow, please forward it to me .
Thanks,
Arun
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:39 EDT