From: SAbramson@Wabtec.com
Date: Thu Jan 29 2004 - 15:14:39 EST
hpux-admins:
David Totsch had another suggestion:
echo $PATH | awk 'BEGIN {RS=":"} {print $1 }'
George's, again, was:
echo $PATH | tr ':' '\n'
What I wanted to do was put every $PATH directory on a seperate line...
Both do the trick.
Stuart
Stuart Abramson | WABTEC Corp. | Wilmerding, PA
Off: 412/825-1434 | Cell: 412/417-1567 | email: sabramson@wabtec.com
_____
From: hpux-admin-owner@DutchWorks.nl [mailto:hpux-admin-owner@DutchWorks.nl]
On Behalf Of Abramson, Stuart
Sent: Thursday, January 29, 2004 2:50 PM
To: hpux-admin@dutchworks.nl
Subject: [HPADM] RE: Awk and $PATH
Thanks to:
George Bodnar
Christopher Schroen
Alan Riggs
Leon Kazakin
Richard Wright
George's solution below...
Stuart
Stuart Abramson | WABTEC Corp. | Wilmerding, PA
Off: 412/825-1434 | Cell: 412/417-1567 | email: sabramson@wabtec.com
_____
From: Bodnar, George [mailto:gbodnar@ppg.com]
Sent: Thursday, January 29, 2004 2:18 PM
To: Abramson, Stuart
Subject: RE: [HPADM] Awk and $PATH
Because $0 is the whole line not a record - you'd have to right a loop to
print each record in awk to achieve what you want.
echo $PATH | tr ':' '\n'
-----Original Message-----
From: SAbramson@Wabtec.com [mailto:SAbramson@Wabtec.com]
Sent: Thursday, January 29, 2004 2:11 PM
To: hpux-admin@dutchworks.nl
Subject: [HPADM] Awk and $PATH
Can someone tell me why:
if this works:
# echo $PATH | awk -F: '{print $1}'
/usr/sbin/
why does't this work:
# echo $PATH | awk -F: '{OFS="\n";print $0}'
/usr/sbin/:/usr/bin/:/usr/sbin:/usr/bin:/opt/ansic/bin:/usr/ccs/bin:/usr/con
trib/bin:/opt/fc/bin:/opt/fcms/bin:/opt/nettladm/bin:/opt/upgrade/bin:/opt/p
d/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/resmon/bin:/opt/pred/bin:/opt/h
parray/bin:/opt/perf/bin:/opt/ignite/bin:/opt/cxperf/bin:/opt/langtools/bin:
/opt/imake/bin://opt/perl/bin:/opt/aCC/bin:/opt/hpnp//bin:/opt/networker/bin
:/opt/graphics/common/bin:/opt/samba-2.2.5/source/bin:/sbin:/home/root:/usr/
emc/ECC/bin:/usr/symcli/bin:/usr/symmapps/vcm:/usr/local/bin:/home/saroot/bi
n:/opt/perf/bin:/usr/symcli/bin:/usr/symcli64/bin/
What I want to do, is separate each separate directory in $PATH on it's own
line.
Stuart
Stuart Abramson | WABTEC Corp. | Wilmerding, PA
Off: 412/825-1434 | Cell: 412/417-1567 | email: sabramson@wabtec.com
***** CONFIDENTIALITY NOTE *****
The content contained in this e-mail transmission is legally privileged and
confidential information intended only for the use of the individual or
entity named herein. If the reader of this transmission is not the intended
recipient, you are hereby notified that any dissemination, distribution, or
copying of this transmission is strictly prohibited.
***** CONFIDENTIALITY NOTE *****
The content contained in this e-mail transmission is legally privileged and
confidential information intended only for the use of the individual or
entity named herein. If the reader of this transmission is not the intended
recipient, you are hereby notified that any dissemination, distribution, or
copying of this transmission is strictly prohibited.
***** CONFIDENTIALITY NOTE *****
The content contained in this e-mail transmission is legally privileged and confidential information intended only for the use of the individual or entity named herein. If the reader of this transmission is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this transmission is strictly prohibited.
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:38 EDT