From: Abramson, Stuart (SAbramson@Wabtec.com)
Date: Wed Dec 17 2003 - 08:47:57 EST
Hpux-admins:
We set up samba on several of our HP-UX servers.
One of our uses has a problem on his Windows client:
If he copies a file from C:\blah.blah to X:\customer\1.0\reports\US
he gets the above error:
"Cannot Copy File. The path is too deep."
If he copies a file from C:\blah.blah to Y:\customer\1.0\reports\US
it works just fine
where "X" is one UNIX server and
"Y" is another UNIX server
In short the "X" SAMBA or server file systems aren't set up right, and I
guess the "Y" server/file systems are set up correctly.
So, where will I look for this problem?
I'm going to start checking EVERYTHING: SAMBA setup and file system
permissions all the up/down the tree.
Stuart
Stuart Abramson | Off: 412/825-1434 | Cell: 412/417-1567 | email:
sabramson@wabtec.com
***** CONFIDENTIALITY NOTE *****
The content contained in this e-mail transmission is legally privileged and confidential information intended only for the use of the individual or entity named herein. If the reader of this transmission is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this transmission is strictly prohibited.
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:37 EDT