From: Beerse, Corne (c.beerse@torex-hiscom.nl)
Date: Tue Aug 05 2003 - 06:49:45 EDT
I got several nice answers from both the HPAdmin and the PARisc-Linux lists.
The answer from Bill Hassell noted that is was most likely not a memory
problem, but a CPU problem. Since there are 2 of them inside the box, I
expect no problems with a single processor linux. I will be verry carefull
on installing smp linux...
Most of them pointed me to ODE (Offline Diagnostics Environement) on the
"Support Plus" cd that came with HP-UX.
The recipy on HP-UX machines:
- Boot from the CDRom
- Interact wit IPL: YES
- (set/read the current itme with CLKUTIL)
- ODE, then, at the ODE prompt:
- ls for a list of tests and options
- menu promisses to be a nice one
Unfortunatly, all is protected with a password and the password I got from
one of you did not match the distribution I have here ("HPUX 11.0, march
2001")
Meanwhile, I'm installing Debian linux on the box, without any hardware
bumps. In the HP-70096 terminal menu, I found the way to have it emulate
VT100 (called "EM100") (starting at the <user-system> button, left to <F5>).
Thanks.
Origional message:
Here I have an HP D370 machine that (during my holidays) crashed. Since the
machine was replaced since long and only kept running for fast access to old
stuff, not a real problem.
At first, we suspected the boot disk since its led keeps buring. However,
booting HP-UX from CDRom for a new fresh install, the boot of the kernel
crashes at roughly the same point, even with all disks removed. Hence we
suspected the core memory. However, changing or replacing the memory does
not change anything in the behavoure.
Is there a way to somehow test the hardware of a PA-Risc machine? Either
from HP or from the linux world?
Kind of like the test tools as found on the (intel-) linux distributions?
btw: I can get debian-woody booted up to the message that if this is the
last message on screen, check the faq. A second terminal (HP 700/96) on tty1
shows a lot of (vt100?) junk. How can I either put the HP700/96 terminal in
VT100 mode or whats the magic name of this terminal in the 'TERM=...' kernel
parameter?
CBee
mailto:c.beerse@torex-hiscom.nl
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:32 EDT