From: Joseph Wright (JWRIGHT@mbakercorp.com)
Date: Thu Jun 05 2003 - 09:52:55 EDT
I am trying to get my second NIC to communicate with my local network. I have lan0 setup on my 192.168 network along with a default route which works great. I have also added a second nic on the 172.16 network. The lan1 nic can not reach anything on the same network. An example is trying to get to 172.16.42.1. I am sure this a simple routing issue. (I included netconf and a netstat -r below)
thanks
--Netconf--
INTERFACE_NAME[0]=lan0
IP_ADDRESS[0]=192.168.200.200
SUBNET_MASK[0]=255.255.255.0
BROADCAST_ADDRESS[0]=""
INTERFACE_STATE[0]=up
DHCP_ENABLE[0]=0
INTERFACE_NAME[1]=lan1
IP_ADDRESS[1]=172.16.42.12
SUBNET_MASK[1]=255.255.255.0
BROADCAST_ADDRESS[1]=""
INTERFACE_STATE[1]=up
DHCP_ENABLE[1]=0
GATED=0
GATED_ARGS=""
RDPD=0
RARP=0
ROUTE_GATEWAY[0]=192.168.200.254
ROUTE_COUNT[0]=1
ROUTE_DESTINATION[0]=default
LANCONFIG_ARGS[0]=ether
root@hp9k> netstat -r
Routing tables
Destination Gateway Flags Refs Interface Pmtu
localhost localhost UH 0 lo0 4136
172.16.42.12 172.16.42.12 UH 0 lan1 4136
hp9k hp9k UH 0 lan0 4136
192.168.200.0 hp9k U 2 lan0 1500
172.16.42.0 172.16.42.12 U 2 lan1 1500
127.0.0.0 localhost U 0 lo0 0
default 192.168.200.254 UG 0 lan0 0
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:30 EDT