From: Quinn, Bryan (Bryan.Quinn@CooperTools.com)
Date: Thu Oct 10 2002 - 11:07:33 EDT
Thanks to all that responded. Due to the heat of the situation I placed a
call with HP and they were able to get the problem resolved for me. Here is
the solution that worked:
HP had me power cycle the box (since it was in single-user and the console
was not functioning). Let the box boot up into multi-user mode as usual.
Then they had me remove the following file /etc/ioctl.syscon ( I elected to
copy it to /tmp and then remove it from /etc). Then boot the box into
single-user mode, this took care of the problem.
Below is my original post!
Thanks again everyone!
-Bryan
ORIGINAL POST:
> Hey Admins,
>
> Need some help once again. I have an N-class that I booted into
> single-user
> mode so that I could increase /tmp, well I booted it into single user and
> now my keyboard does not respoind. I can, however, go into GSP so they
> keyboard does have a good connection. So, apparently something at the OS
> level is going on? Any suggestions would be greatly appreciated!
>
> Thanks,
> Bryan Douglas Quinn
> UNIX Support Specialist
> Cooper Power Tools
> Lexington, SC
> (803) 808-6770
> Bryan.Quinn@coopertools.com
>
>
>
> --
> ---> Please post QUESTIONS and SUMMARIES only!! <---
> To subscribe/unsubscribe to this list, contact
> majordomo@dutchworks.nl
> Name: hpux-admin@dutchworks.nl Owner:
> owner-hpux-admin@dutchworks.nl
>
> Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse
> only)
> http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse &
> search)
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:20 EDT