From: Aaron Bennett (abennett@olin.edu)
Date: Thu Aug 15 2002 - 15:04:13 EDT
While waiting, I discovered the answer myself. This requires HP patch
PHSS_2740.
http://support2.itrc.hp.com/service/cki/patchDocDisplay.do?patchId=PHSS_
27407
-----Original Message-----
From: hpux-admin-owner@DutchWorks.nl
[mailto:hpux-admin-owner@DutchWorks.nl] On Behalf Of Aaron Bennett
Sent: Thursday, August 15, 2002 2:17 PM
To: hpux-admin@dutchworks.nl
Subject: [HPADM] make_recovery failure
{ sorry if this message is duplicated. I was having some email problems
earlier }
Hello --
When running either make_recovery or make_tape_recovery under HP-UX
11.00, I
get the following error message:
***************************************
HP-UX System Recovery
Going to create the tape.
make_recovery(466): Call to /opt/ignite/bin/make_medialif failed.
Check the /var/opt/ignite/logs/makrec.log1 file.
Cleanup
/var/opt/ignire/logs/makrec.log1 ( included below ) reports "probable
insufficient space" on /var/tmp. /var has 4.3 GB available.
Any ideas? Thanks, and I will summarize to the list, of course.
Regards,
Aaron Bennett
Unix Systems Administrator
Franklin W. Olin College of Engineering
abennett@olin.edu
# cat /var/opt/ignite/logs/makrec.log1
********
Started - Thu Aug 15 13:50:24 2002
********
make_recovery
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d -v
"/opt/ignite/bin/save_config" -f
"/var/opt/ignite/recovery/config.recover"
"vg00" >> "/var/opt/ignite/logs/makrec.log1" 2>&1
/usr/sbin/vgcfgbackup "vg00" >> /var/opt/ignite/logs/makrec.log1 2>&1
Volume Group configuration for /dev/vg00 has been saved in
/etc/lvmconf/vg00.conf
/usr/sbin/vgcfgbackup "vg01" >> /var/opt/ignite/logs/makrec.log1 2>&1
Volume Group configuration for /dev/vg01 has been saved in
/etc/lvmconf/vg01.conf
/usr/sbin/vgexport -p -m /etc/lvmconf/vg01.mapfile vg01 >>
/var/opt/ignite/logs/makrec.log1 2>&1
vgexport: Volume group "vg01" is still active.
"/opt/ignite/bin/instl_adm" -T -f
"/var/opt/ignite/recovery/config.recover" >>
/var/opt/ignite/logs/makrec.log1 2>&1
NOTE: File: /var/opt/ignite/recovery/config.recover is not
world-readable,
this may cause clients to fail to read it during an
installation.
"/opt/ignite/bin/make_medialif" -a -f
"/var/opt/ignite/recovery/config.recover" -l
"/var/tmp/uxinstlf.recovery" -C
"HP-UX System Recovery" >> /var/opt/ignite/logs/makrec.log1 2>&1
lifcp: Cannot create SYSCMDS ; no space on the LIF volume
make_medialif: error - lifcp SYSCMDS failed, probable insufficient size
for
/var/tmp/uxinstlf.recovery
********
Ended Unsuccessfully - Thu Aug 15 13:51:17 2002
-- ---> Please post QUESTIONS and SUMMARIES only!! <--- To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only) http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search) -- ---> Please post QUESTIONS and SUMMARIES only!! <--- To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only) http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:17 EDT