From: Justin Willoughby (jwilloug@mhc.net)
Date: Fri Aug 02 2002 - 12:03:02 EDT
As I thought, I would need to force the other link to be used once it is restored/working again. This could be done with a vgreduce on the disk device so it would use the other one.
The other option as mentioned by Rita is to purchase an HP software product by the name of autopath.
Thanks for all who replied!
- Justin
==================
Justin Willoughby
Computer Operations
==================
>>> "Justin Willoughby" <jwilloug@mhc.net> 08/01/02 03:50PM >>>
I have a related question about pvlinks.
We have two fibre cards, I am planing to use every other disk from one fibre card and the primary and the other as an alternate link. Basically to some-what load balance the traffic between the two cards. In the event that one of the cards or fibre lines fail all disk access will be via one of the two fibre cards/fibre.
My question is, once the down card/fibre is restored will the system go back to the way it was before where half of the traffic is using one card and the other half using the other card?
Thanks!
- Justin
==================
Justin Willoughby
Computer Operations
==================
>>> "Justin Willoughby" <jwilloug@mhc.net> 08/01/02 09:56AM >>>
We installed two fibre channel cards in our K570. We want to connect it to our fibre switch. Is there any reason this cannot be done while the system is up in running or should we bring the system down to do this?
Thanks,
- Justin
==================
Justin Willoughby
Computer Operations
==================
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:17 EDT