From: Jeff Cleverley (jeff_cleverley@agilent.com)
Date: Tue Jul 30 2002 - 15:47:40 EDT
Greetings,
Thanks for replies from:
Mike Blanchette
Jay Duncan
John Kingsland
Stéphane Lachapelle
Richard Wright
The original question is at the end. Most responses were fuser and
lsof. These did not return a process. I decided to see if I could
unmount the file system and I could. I couldn't remount it until I did
a full fsck on it though. After it was remounted, the vxupgrade worked
fine.
I believe the problem probably stemmed from an incident a couple of
weeks back were some EMC disks were temporarily removed from access to
the server. Access was re-added shortly after and everything appeared
to be fine. All disks could be diskinfo'd/pvdisplayed, etc.
Thanks for the replies and help,
Jeff
Original post:
Greetings,
I have some servers running 11.00 that I recently upgraded to OnLineJFS
3.3. I have upgraded all but one file system to layout4. I get the
following message:
#ROOT deere $ vxupgrade /mnt/sso
/mnt/sso: vxfs file system version 3 layout
#ROOT deere $ vxupgrade -n 4 /mnt/sso
vxfs vxupgrade: cannot upgrade /dev/vg01/rsso - Device busy
#ROOT deere $
I've looked for pv/vg/lv* or SAM commands that may be running and
nothing is. A vgdisplay -v shows everything active/available/synced.
How can I find out what it thinks is making it busy?
Thanks,
Jeff Cleverley
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:17 EDT