[HPADM] Com port problem

From: Jon B. Carter (Jon.Carter@post.serco.com)
Date: Tue Jun 18 2002 - 03:56:10 EDT

• Next message: Sue Pellerito: "[HPADM] Veritas Volume Mgr"
• Previous message: Baran YURDAGUL: "[HPADM] SummaryRe: group id more than 8 characters."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi all,

I'm having trouble with the settings on the COM port on a 700 series machine running under HPUX 10.20.

Firstly, I can't find where to set the parameters for it, i.e. 8 bit, 1 stop bit, no parity.

Secondly, when I connect it to the serial port of the target device, the correct text appears but is arranged diagonally in the xterm window.

Any ideas much appreciated.

TIA & best regards,
Jon

--
             ---> Please post QUESTIONS and SUMMARIES only!! <---
        To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
       Name: hpux-admin@dutchworks.nl     Owner: owner-hpux-admin@dutchworks.nl
 
 Archives:  ftp.dutchworks.nl:/pub/digests/hpux-admin       (FTP, browse only)
            http://www.dutchworks.nl/htbin/hpsysadmin   (Web, browse & search)

• Next message: Sue Pellerito: "[HPADM] Veritas Volume Mgr"
• Previous message: Baran YURDAGUL: "[HPADM] SummaryRe: group id more than 8 characters."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:14 EDT