[HPADM] RE: -SUMMARY-Print drivers fro HPUX 11.0

From: Naylor, Jim (Jnaylor@Schnucks.com)
Date: Mon Jun 17 2002 - 16:00:17 EDT


Thanks to Bill Hassel, Paul Miller, Richar Wright, and Joel Breger. In
general there are no drivers so to speak. Most suggested using the dumb
model. I will give that a try.

Thanks again,

Jim Naylor
Unix Systems Administrator
Schnuck Markets, Inc.
314-994-4784
jnaylor@schnucks.com

-----Original Message-----
From: Naylor, Jim [mailto:Jnaylor@schnucks.com]
Sent: Wednesday, June 05, 2002 1:03 PM
To: Hpux-Admin@Dutchworks. Nl (E-mail)
Subject: [HPADM] Print drivers fro HPUX 11.0

Good Day All,
We have a couple of large IBM Line Printers Model 6601 (I believe) that have
external jet direct boxes attached to them and I need to set them up on an
HP N4000 running HPUX 11.0. The problem is when I go to set up a remote
printer through jet direct in SAM and it lists the types of printers, there
is nothing even close to this type of printer. Is there somewhere I can go
to get additional printer drivers that may support these types of printers?

Thanks,

Jim Naylor
Unix Systems Administrator
Schnuck Markets, Inc.
* Direct: (314) 994-4784
*)) Cell: (314) 691-0186
* Fax : (314) 994-4684
* jnaylor@schnucks.com

--
             ---> Please post QUESTIONS and SUMMARIES only!! <---
        To subscribe/unsubscribe to this list, contact
majordomo@dutchworks.nl
       Name: hpux-admin@dutchworks.nl     Owner:
owner-hpux-admin@dutchworks.nl
 
 Archives:  ftp.dutchworks.nl:/pub/digests/hpux-admin       (FTP, browse
only)
            http://www.dutchworks.nl/htbin/hpsysadmin   (Web, browse &
search)
--
             ---> Please post QUESTIONS and SUMMARIES only!! <---
        To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
       Name: hpux-admin@dutchworks.nl     Owner: owner-hpux-admin@dutchworks.nl
 
 Archives:  ftp.dutchworks.nl:/pub/digests/hpux-admin       (FTP, browse only)
            http://www.dutchworks.nl/htbin/hpsysadmin   (Web, browse & search)


This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:14 EDT