From: Bill Verzal (BVerzal@KOMATSUNA.COM)
Date: Thu Mar 25 2004 - 08:47:43 EST
No. The SSA RAID arrays are protected at a hardware level. You cannot see
any of the 6 disks.
BV
--------------------------------------------------------
"If everything is coming your way, then you are in the wrong lane"
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
cuihh cuihh
<cuihh6@hotmail.c
om> To
Sent by: IBM AIX aix-l@Princeton.EDU
Discussion List cc
<aix-l@Princeton.
EDU> Subject
need solutions when making RAID10
array on 7133
03/24/2004 06:00
PM
Please respond to
IBM AIX
Discussion List
<aix-l@Princeton.
EDU>
two host : A and B
Both A and B are connect to the same 7133 disk subsystem.
I want to make an RAID10 array, so I have selected six pdisks to construct
the RAID10 array, the first three are defined as the primary disks and the
others are defined as the secondary disks.
Is it possible to make that the primary disks can only be accessed by A
and
the secondary pdisks can only be accessed by B ?
If it is , Please tell me how .
Thanks in advance.
_________________________________________________________________
Ãâ·ÑÏÂÔØ MSN Explorer: http://explorer.msn.com/lccn/
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:45 EDT