From: fmu@OERAG.DE
Date: Mon Mar 22 2004 - 06:26:59 EST
Hi *,
I have no experience with VisualAge C++ on AIX
Now I have a question. I deinstall the old Version (4.0) and install the
new VisualAge C++ Version 6. But now the Makefile-Command false. What must
I export for an environment or change the .profile that the Makefile
command runs.
ikarus/sli: [~/VeraImport]$ Makefile
./Makefile: all:: command not found
./Makefile: target_dir: command not found
./Makefile: exe: command not found
./Makefile: obj: command not found
cc: 1501-228 input file = not found
cc: 1501-228 input file xlC not found
cp: =: A file or directory in the path name does not exist.
./Makefile: VeraKonv:: command not found
./Makefile: exe: command not found
./Makefile: C: command not found
./Makefile: VeraKonv.o:: command not found
./Makefile: obj: command not found
./Makefile: C: command not found
Best regards,
Frank Mueller
"Green, Simon"
<Simon.Green@EU.A An: aix-l@Princeton.EDU
LTRIA.COM> Kopie:
Gesendet von: IBM Thema: Re: Antwort: Re: Antwort: Re: SP nodes hangs during migration on LED c48
AIX Discussion [Virus checked]
List
<aix-l@Princeton.
EDU>
10.03.2004 10:43
Bitte antworten
an IBM AIX
Discussion List
The fastest way to figure out what the problem is, is via the s1term: see
what it's prompting for. Otherwise you just end up running lots of
nodeconds until you finally hit on the problem.
However...
Did you re-set the bootlist after you unmirrored rootvg? What disks was
hd5
on?
Generally, IBM advice using the hardware address for rootvg disks in the
SDR. You might try changing it to use these, just in case.
-- Simon Green Altria ITSC Europe Ltd AIX-L Archive at https://new-lists.princeton.edu/listserv/aix-l.html New to AIX? http://publib-b.boulder.ibm.com/redbooks.nsf/portals/UNIX N.B. Unsolicited email from vendors will not be appreciated. Please post all follow-ups to the list. > -----Original Message----- > From: fmu@OERAG.DE [mailto:fmu@OERAG.DE] > Sent: 10 March 2004 08:44 > To: aix-l@Princeton.EDU > Subject: Antwort: Re: Antwort: Re: SP nodes hangs during > migration on LED c48 [Virus checked] > > > yes. But it is not normal that the node needs an input by a > migration. It > must be an configuration problem on node or/and SDR > > I think so......
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:44 EDT