From: fmu@OERAG.DE
Date: Wed Mar 10 2004 - 03:15:04 EST
Hi,
no that is not the problem. I have an s1term startet without the "-w"
option. That is normal and it is o.k.
The problem must be an other.....
Raj Atwal
<atwalrs@YAHOO.CO An: aix-l@Princeton.EDU
M> Kopie:
Gesendet von: IBM Thema: Re: SP nodes hangs during migration on LED c48 [Virus checked]
AIX Discussion
List
<aix-l@Princeton.
EDU>
09.03.2004 21:15
Bitte antworten
an IBM AIX
Discussion List
Hi Frank,
My notes indicate that c48 is "Prompting you for input", it is probably
awaiting you to select the language or something. Do you have a s1term
open? If not open one as you do the nodecond.
HTH
Raj Atwal
fmu@OERAG.DE wrote:
Hi *,
I want to migrate a pci node from AIX 4.3.3 PSSP 3.2 to AIX 5.2 PSSP 3.5
So I read that it is better to unmirror the rootvg bevor I migrate. O.k. I
unmirror the rootvg, logform, bosboot -ad/dev/hdisk0, and so on. Boot the
node, always is ok.
rootvg has now 2 disks (hdisk0, hdisk1) and it is unmirror. All datas on
hdisk0, hdisk1 is emty.
So I change the SDR entries on cws.
# splstdata -v -l 9
List Volume Group Information
node# name boot_server quorum copies code_version
lppsource_name
last_install_image last_install_time last_bootdisk
pv_list
----- ---------------- ----------- ------ ------ ----------------
--------------
--------- ------------------------ --------------------
--------------------
----------------------------------------------------------------------
9 rootvg 0 true 1 PSSP-3.5 aix520
zeus_aix433_05032004 Tue_Mar__9_11:25:59 hdisk1
hdisk0,hdisk1
(root:hermes_e)[/]
#
# splstdata -b -l 9
List Node Boot/Install Information
node# hostname hdw_enet_adr srvr response install_disk
last_install_image last_install_time next_install_image
lppsource_name pssp_ver selected_vg
----- ----------------- ------------- ---- ------------
------------------------
--------------- ------------------- --------------------
-------------------
-------------- ------------------- -------------------
9 zeus 0004AC315270 0 migrate hdisk0,hdisk1
zeus_aix433_0503200 Tue_Mar__9_11:25:59 zeus_aix433_0503200
aix520 PSSP-3.5 rootvg
# (root:hermes_e)[/]
setup_server, etc. is o.k. Now I start the nodecond and the node hangs on
LED c48
What is wrong? I read in the PSSP-diag book that is a hint for wrong
entries for the disks!
Best regards,
Frank Mueller
______________________________
Raj Atwal
______________________________
Do you Yahoo!?
Yahoo! Search - Find what you're looking for faster.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:41 EDT