From: fmu@OERAG.DE
Date: Tue Mar 09 2004 - 14:26:17 EST
Hi *,
I want to migrate a pci node from AIX 4.3.3 PSSP 3.2 to AIX 5.2 PSSP 3.5
So I read that it is better to unmirror the rootvg bevor I migrate. O.k. I
unmirror the rootvg, logform, bosboot -ad/dev/hdisk0, and so on. Boot the
node, always is ok.
rootvg has now 2 disks (hdisk0, hdisk1) and it is unmirror. All datas on
hdisk0, hdisk1 is emty.
So I change the SDR entries on cws.
# splstdata -v -l 9
List Volume Group Information
node# name boot_server quorum copies code_version
lppsource_name
last_install_image last_install_time last_bootdisk
pv_list
----- ---------------- ----------- ------ ------ ----------------
--------------
--------- ------------------------ ------------------- --------------------
----------------------------------------------------------------------
9 rootvg 0 true 1 PSSP-3.5 aix520
zeus_aix433_05032004 Tue_Mar__9_11:25:59 hdisk1
hdisk0,hdisk1
(root:hermes_e)[/]
#
# splstdata -b -l 9
List Node Boot/Install Information
node# hostname hdw_enet_adr srvr response install_disk
last_install_image last_install_time next_install_image
lppsource_name pssp_ver selected_vg
----- ----------------- ------------- ---- ------------
------------------------
--------------- ------------------- ------------------- -------------------
-------------- ------------------- -------------------
9 zeus 0004AC315270 0 migrate hdisk0,hdisk1
zeus_aix433_0503200 Tue_Mar__9_11:25:59 zeus_aix433_0503200
aix520 PSSP-3.5 rootvg
# (root:hermes_e)[/]
setup_server, etc. is o.k. Now I start the nodecond and the node hangs on
LED c48
What is wrong? I read in the PSSP-diag book that is a hint for wrong
entries for the disks!
Best regards,
Frank Mueller
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:41 EDT