From: fmu@OERAG.DE
Date: Mon Mar 08 2004 - 03:48:14 EST
Hi *,
in the moment runs nothing. So I restart the restore with the mksysb. After
this I will check this....
Best regards,
Frank Mueller
Holger.VanKoll@SW
ISSCOM.COM An: aix-l@Princeton.EDU
Gesendet von: IBM Kopie:
AIX Discussion Thema: Re: cannot start a telnet session to a node after mksysb installation [Virus
List checked]
<aix-l@Princeton.
EDU>
08.03.2004 09:26
Bitte antworten
an IBM AIX
Discussion List
can you ping the gateway?
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU] On Behalf Of
fmu@OERAG.DE
Sent: Sunday, March 07, 2004 2:23 PM
To: aix-l@Princeton.EDU
Subject: cannot start a telnet session to a node after mksysb
installation [Virus checked]
Hi,
I install a SP node with the own mksysb. After the installation it is
not
possible to connect the node via telnet, rlogin. It is not possible to
ping
the node.
Only over the intern ethernel (en0) I can login. So I login and I check
something. When I'm on the node, so I can ping the adapter (en2). But
when
I try to ping the nameserver or ask with nslookup I don't get a
response.
The adapter is up, /etc/hosts, /etc/netsvc.conf, /etc/resolv.conf shows
o.k.
What can I do?
Best regards,
Frank Mueller
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:40 EDT