From: Bill Verzal (BVerzal@KOMATSUNA.COM)
Date: Mon Feb 09 2004 - 11:47:55 EST
Machine microcode level ?
--------------------------------------------------------
"If everything is coming your way, then you are in the wrong lane"
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
Greg Breuer
<breuerg@MISSOURI
.EDU> To
Sent by: IBM AIX aix-l@Princeton.EDU
Discussion List cc
<aix-l@Princeton.
EDU> Subject
AIX 5.1, 43Ps and the mouse
02/09/2004 10:29
AM
Please respond to
IBM AIX
Discussion List
<aix-l@Princeton.
EDU>
I am submitting this to lanman also in case some AIX users still exist.
I am having mouse problems on various 43Ps as I migrate (clean install) to
AIXL (5.1). Two machines, the mice are not available and a 43P-140 keeps
freezing up(pointer frozen, can not PING or TELNET to box). Here's what
diag tells me:
A PROBLEM WAS DETECTED ON Thu Feb 5 08:58:27 CST 2004
801014
The Service Request Number(s)/Probable Cause(s)
(causes are listed in descending order of probability):
803-925: A software error was encountered while running the Diagnostic
Application on mouse0.
Use Enter to continue.
Any ideas?
-- Greg Breuer System Administrator Missouri Spatial Data Information Service Geographic Resources Center 16 Stewart Hall University of Missouri-Columbia Columbia MO 65211-6170 573-884-7802 mailto:breuerg@missouri.edu
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:34 EDT