From: Support (support@XIATECS.NET)
Date: Thu Feb 05 2004 - 16:33:47 EST
/usr/lib/boot/ssh is a small runtime environment that is called during
bootup time, so it is needed to create a bootable mksysb tape. The
bos.rte.boot fileset contains the file, so I would run "lslppp -f
bos.rte.boot " and make sure that all the files listed are actually on
your system. If they are not, then you will need to install them.
PS. Did you install a maintenance level or fixes that require a reboot,
but have not rebooted yet?
Thanks,
_________________________________
Sukhjeet Singh
Senior Technology Consultant
IBM Certified Specialist - AIX
Xiatecs Systems Consultants Inc.
Tel: +1.514.668.0838
www.xiatecs.net - ssingh@xiatecs.net
_________________________________
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU] On Behalf Of
Fette, Gustavo
Sent: Thursday, February 05, 2004 3:22 PM
To: aix-l@Princeton.EDU
Subject: Mksysb failed
Hi!
I'm doing a mksysb and get this:
COMMAND STATUS
Command: failed stdout: yes stderr: no
Before command completion, additional instructions may appear below.
Creating information file (/image.data) for rootvg.......
Creating tape boot image.
0301-154 bosboot: missing proto file: /usr/lib/boot/ssh
0512-016 mksysb: Attempt to create a bootable tape failed:
bosboot -d /dev/rmt0.1 -a failed with return code 41.
Do you know what can be happening?
Regards,
Gustavo Fette
MMH - GOSD
EDS Argentina
Arias 1851 - Buenos Aires
Phone: +54 11 4704-3403
Mobile: +54 9 11 5110-2325
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:34 EDT