From: Naylor, Jim (Jnaylor@SCHNUCKS.COM)
Date: Fri Jan 30 2004 - 15:00:54 EST
Hello All,
I have an F40 with a raid controller and two internal raid 5 arrays. One
array in each of two six packs (hdisk6 and hdisk7). Each array has 6 18 gig
drives. I have been having problems with a drive in hdisk7. and today the
system crashed. When the system came back up nothing would mount. I look
at the array status and it was showing only hdisk7 but with the drives from
hdisk6. hdisk6 was channel 1 with 18, 19 1A, 1B, 1C, 1D and hdisk7 was
channel 2 with 28, 29, 2A, 2B, 2C, 2D. Now it shows hdisk7 with 18-1D. I
decided to wipe out the filesystems, volume group (which had hdisk6 and
hdisk7). Remove each array and re-make the arrays. Somehow the volume
group is varied off and when I try to varyonvg pdxvg it tells me quorum
problem, not enough disks. I cannot remove the filesystems because it says
I have to have the volume group varied on and I can remove the volume group
because it cannot remove the logical volumes. Does anyone know how I can
get rid of this volume group and filesystems??????
Thanks,
Jim Naylor
Unix Systems Administrator
Schnuck Markets, Inc.
* Direct: (314) 994-4784
*)) Cell: (314) 691-0186
* Fax : (314) 994-4684
* jnaylor@schnucks.com
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:33 EDT