From: David Knight (David.Knight@CLUBCORP.COM)
Date: Tue Jan 13 2004 - 13:44:34 EST
Admins,
I recently receive a new AIX Server in and the telnet connections
are extremely slow. From the console I can telnet to localhost with no
delay but all incoming telnet connections are extremely slow. after telnet
connects it takes a good minute for the login prompt. so I initially
thought that this was a Reverse DNS issue but after I am finally able to
log in every command I type takes abut 60 seconds to echo to the screen
and continue Any help or suggestions would be greatly appreciated.
O and the hosts that I am telnet from are in the /etc/hosts file and
nslookup/DNS seems fine.
Thank in advance,
David Knight
Aaron W Morris <aaronmorris@MINDSPRING.COM>
Sent by: IBM AIX Discussion List <aix-l@Princeton.EDU>
01/13/2004 12:36 PM
Please respond to IBM AIX Discussion List
To: aix-l@Princeton.EDU
cc:
Subject: Re: meet Problems when try to mount the floppy disk
JOSEPH KREMBLAS wrote:
> Looks to me like you destroyed the layout of the floppy disk when you
were
> asked to destroy it. You shouldn't be mounting a floppy disk anyway. Use
the
> dosread, dosdir, and doswrite commands to perform operations on the
floppy
> drive.
>
> -----Original Message-----
> From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU] On Behalf Of
> Paul. Vanchope
> Sent: Tuesday, January 13, 2004 5:29 AM
> To: aix-l@Princeton.EDU
> Subject: meet Problems when try to mount the floppy disk
>
>
> Insert a floppy disk into the floppy disk drive.
> Execute the following command in order to mount the floppy disk to a fs:
> #mkfs -V jfs /dev/fd0
> mkfs: destroy /dev/fd0 (yes)? y
> Device /dev/fd0:
> Standard empty filesystem
> Size: 2880 512-byte (UBSIZE) blocks
> Initial Inodes: 512
> #mkdir /flo
> #mount -o nointegrity /dev/fd0 /flo
> mount: 0506-324 Cannot mount /dev/fd0 on /flo: There is an input or
output
> error. Then i attempt to read file in the floppy disk: #dosread -D
/dev/fd0
> readme.txt chap.txt
> read: /dev/fd0: There is an input or output error.
> Abort, Retry, Ignore?
>
> Why the "mount" and "dosread" all fail ? (In Windows 2000 Server, the
files
> in the floppy disk could be successfully read out).
You can also use the mtools that comes with AIX 5. With mtools, you
have commands available that emulate old dos commands:
mdir
mformat
mcopy
mmove
mmd
mattrib
All you do is reference the floppy drive like a dos drive letter, ie
"mcopy file.txt a:" or "mdir a:".
-- Aaron W Morris <aaronmorris@mindspring.com> (decep)
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:29 EDT