From: Bill Verzal (BVerzal@KOMATSUNA.COM)
Date: Fri Jan 09 2004 - 15:09:48 EST
SSA adapter microcode is up to date. I applied that earlier in the week.
Server microcode is current. Applied that earlier in the week as well.
oslevel is 5200-02.
The drives are DMVC, which do not have microcode updates on the SSA site.
I already checked that.
BV
--------------------------------------------------------
"If everything is coming your way, then you are in the wrong lane"
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
"Patrick B.
O'Brien"
<pobrien@DOIT.NV. To
GOV> aix-l@Princeton.EDU
Sent by: IBM AIX cc
Discussion List
<aix-l@Princeton. Subject
EDU> Re: ssa oddity - or maybe it is
just me
01/09/2004 02:02
PM
Please respond to
IBM AIX
Discussion List
<aix-l@Princeton.
EDU>
My first thought is Microcode.
Did you look at the loops in Diag, SSA Service Aids?
-----Original Message-----
From: Bill Verzal [mailto:BVerzal@KOMATSUNA.COM]
Sent: Friday, January 09, 2004 11:59 AM
To: aix-l@Princeton.EDU
Subject: ssa oddity - or maybe it is just me
Hi *.
I have a 6F1 here that I am building out. It has 4 SSA 18.2 internal disk
and a SSA160 adapter cables A1/A2 to the internal disks. B1/B2 are not
cabled.
The outside 2 drives (slots 1 and 4) are blinking green, slots 5 and 6 have
fillers. The A loop light on the SSA adapter is green solid.
Only 2 pdisk and hdisks show up on the system.
What is this telling me ?
BV
--------------------------------------------------------
"If everything is coming your way, then you are in the wrong lane"
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:29 EDT