From: Bob.Kelley@BRINKSINC.COM
Date: Tue Jan 06 2004 - 16:43:47 EST
Can somebody make sense of this error for me? I get it pretty randomly even
with dvds that previously worked in using mkcd through smitty with a new
mksysb image....
Backing up 42475 files..............................
7612 of 42475 files (17%)......................
42475 of 42475 files (100%)
0512-038 mksysb: Backup Completed Successfully.
Populating the CD or DVD file system...
Copying backup to the CD or DVD file system...
Creating Rock Ridge format image...
Running mkisofs ...
mkrr_fs was successful.
Making the personal CD or DVD image bootable...
Writing the CD or DVD image to device: /dev/cd0...
Running readcd ...
Capacity: 2236704 Blocks = 4473408 kBytes = 4368 MBytes = 4580 prMB
Sectorsize: 2048 Bytes
CDB: 0A 00 00 00 20 00
Sense Bytes: 70 00 07 00 00 00 00 0A 00 00 00 00 27 00 00 00 00 00
Sense Key: 0x7 Data Protect, Segment 0
Sense Code: 0x27 Qual 0x00 (write protected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s
Copy from file '/clips06/cd_image_93198' to SCSI (0,0,0) disk
end: 2236704
/usr/bin/readcd: I/O error. write_g0: scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
/usr/bin/readcd: I/O error. Cannot write destination disk
burn_cd: Command error.
0512-322 mkcd: An error has occurred
writing the CD or DVD image to the CD or DVD device.
If you would like to attempt to write to another CD or DVD, replace
the current CD or DVD with a new writable CD or DVD. Press the <enter> key
when ready...
If you would like to stop the command and cleanup, Press 'q' to quit...
Bobby Kelley Jr.
972-877-5341
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:28 EDT