From: Bill Verzal (BVerzal@KOMATSUNA.COM)
Date: Mon Jan 05 2004 - 14:05:05 EST
FC 6228 PNs 03N2452 (FRU 09P0102) , 09P5079 (FRU 09P5080), 00P2995 (FRU 00P2996), 00P4494 (FRU
00P4495)
FC 6227 PN 09P4038, 09P1162, 03N4167, or 24L0023.
Got this from the Microcode download page.
lscfg -vpl fcs*|grep -i -E "fru|part"
--------------------------------------------------------
"If everything is coming your way, then you are in the wrong lane"
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
Drew Myers
<myersd@VANGUARDC
AR.COM> To
Sent by: IBM AIX aix-l@Princeton.EDU
Discussion List cc
<aix-l@Princeton.
EDU> Subject
Re: HBA model numbers
01/05/2004 12:54
PM
Please respond to
IBM AIX
Discussion List
<aix-l@Princeton.
EDU>
Maybe I'm doing something wrong, but lsattr -El fcs0 only lists info
about the bus, and various Max transfer information.
bus_intr_lvl 35 Bus interrupt level
False
bus_io_addr 0xfc00 Bus I/O address
False
bus_mem_addr 0xe0020000 Bus memory address
False
init_link al INIT Link flags
True
intr_priority 3 Interrupt priority
False
lg_term_dma 0x200000 N/A
True
max_xfer_size 0x100000 Maximum Transfer Size
True
num_cmd_elems 200 Maximum number of COMMANDS to queue to the
adapter True
pref_alpa 0x1 Preferred AL_PA
True
sw_fc_class 2 FC Class for Fabric
True
John Jolet wrote:
> did you look at the output from lsattr -E -l?
> On Mon, 2004-01-05 at 11:25, Drew Myers wrote:
>
>>Hey all,
>>
>>
>>Is there a way to determine the model number of an installed HBA in AIX
>>5.2? I checked lscfg but don't find anything resembling model numbers.
>> I'm trying to determine if I have 6228s (pretty sure this is it).
>>
>>Any suggestions?
>>
>>Also, anyone know if AIX 5.2 plays well with ECC (EMC Control Center)
5.2.2?
>>
>>Thanks,
>>
>>Drew Myers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:27 EDT